HARDCHROME PLATING APPLICATION IN AEROSPACE INDUSTRY Hard Chrome plating can be used over temperature range from -70 f to 800 f and can...

Nickel plating application in Aerospace Industry The aerospace and airline industry has utilized electroless nickel plating for a...

1. ISO 9001 the ISO 9001 certification was developed by the International Organization for Standardization or ISO. If an organization is...

1.ENERGY Improve equipment efficiency to reduce energy consumption. Use VFD motor controls where appropriate to slow fans, pumps and...

POSITION IN ELECTROPLATING COMPANIES 1. D.G.M (DEPUATY GENERAL MANAGER) WORK-General Manager assists the General Manager to plan,...

1.Poor adhesion for electroplating on alumina dispersed strengthened copper? Have you tried a Wood's Ni strike? Basically, NiCl2 in HCl...

1. Optimize Ventilation Exhaust Air Each 1000 CFM of ventilation requires about one kilowatt of electric load. For winter heating in...

Use Of Graphene in Electroplating Industry GNP is becoming multifunctional additive that can greatly extend coating life and durability....

Definition Electroplating is a process that uses an electric current to reduce dissolved metal cations so that they form a thin coherent...

“Achievements are precious and timeless, just like the precious metal platinum. And what better way to celebrate milestones in your life...

Working Principle Of Electroplating To understand the concept further, let’s take an example of a gold coating. In this instance, a layer...

History of electroplating the art and science of depositing neutral metal coatings from metal ions in solutions goes back over two...

Flow analysis Method Flow analysis is the generic name for all analytical techniques that are based on the introduction, processing, and...

they do not all have the same preferential growth sites or directions. For example, like in your case, having a good adhesion for the Ni...

Try to proceed with electroless plating method. This method has the advantage to offer good adherence even on non-conducting substrate....

I would say that the problem is simple. It is called contamination. You want metallic Nickel and copper but if you put sulphides together...